![]() IR sensors that are used to receive the signals from IR remote controls can be overloaded by different types of light that cause the sensors to miss the signals being sent by the remote control. IR remote controls generally offer a maximum working distance of 30’ (10 meters) but reliability is reduced by the exposure of direct sunlight. In these cases, an IR remote control simply won’t work but joystick controllers are ideal for controlling PTZ cameras from remote locations using cabling. Many PTZ cameras are mounted in locations that are far away from the camera operators such as the ceiling in a church, or across in a theater at a school. The camera is ready to use on your network. Use your smartphone to control the camera, vMix, or OBS. Now you can connect to the camera with any device on your network.Use the shortcut + + to see the camera’s new IP address.This reboots the camera and when it’s done the camera should receive an IP address from your router. You have a DHCP capable server so you use shortcut + + to enable Dynamic IP addressing on the camera. The IP address is set to a manufacturer default and it’s not set up to work on your network.Shortcut + + is used to display the camera’s current IP address on the video. You connect the camera to an HDMI monitor to view the video.The camera is turned on and the IR remote control is used to check basic PTZ controls.Using a few IR remote control shortcuts, you can easily set up your camera on the network and show the camera’s IP address on the video feed. When a PTZ camera is first connected to a network, it is often set up with a static IP address that may not be reachable by your computer. P/T RST Button : Press the button to self-calibrate pan and tilt once again.īeyond standard pan, tilt, and zoom camera operations, the IR remote can be used to set up new PTZ cameras for network control.To cancel this function, press the backlight ON / OFF button In this case, press the backlight ON / OFF button. If there is a light behind the subject, the subject will appear dark. NOTE: Effective only in auto exposure mode. ![]() Press it again to disable the backlight compensation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |